Rider Mill

NEW HOMES

October 03, 1999

Chateau Builders has opened a model at its Rider Mill community in Owings Mills.

The community, which features public water and sewer, gas heat, has five floor plans available.

The model, the Tilghman, is a four-bedroom, two-story transitional that starts at $205,990 for 2,430 square feet.

The first floor features a foyer, 14-by-12-foot living room, 11-by-12-foot dining room, 11-by-13-foot kitchen, 11-by-11-foot breakfast nook, 20-by-15-foot family room and a two-car garage.

The second floor consists of 12-by-13-foot bedroom, bathroom, 12-by-13-foot bedroom, 12-by-11-foot bedroom, 15-by-16-foot master bedroom with master bath and walk-in closet.

Four other floor plans range from the 1,400-square-foot Denton, which starts at $169,990, to the Fenwick, which starts at $194,490 for 2,200 square feet.

The model is open weekdays 11 a.m. to 6 p.m. except Thursdays.

To get to Rider Mill, take Interstate 795 to Franklin Boulevard (East). Make a right on Reisterstown Road and a right on Delight Road. Turn left on Church Road and left again on Stone Garden Court. The model is on the right.

Builder: Chateau Builders

Phone number: 410-654-9393

Developer: Chateau Valley Development Corp.

Base price: $205,990

Style: Transitional

Number of units: 19

Square footage: 2,430

Options: Master bedroom sitting room ($2,280), gas fireplace ($3,900), 4-foot extension in master bedroom and family room ($8,000)

Notices of new models, new construction or proposed developments can be sent in the following ways: Mailing address: The Baltimore Sun, Real Estate Section, Fifth Floor, 501 N. Calvert St., Baltimore, MD 21278-0001.

Fax: 410-783-2517. E-mail: real.estate@baltsun.com

Baltimore Sun Articles
|
|
|
Please note the green-lined linked article text has been applied commercially without any involvement from our newsroom editors, reporters or any other editorial staff.